So what do you really get for that extra 425K

Very interesting, well worth a read, and a good point being made...

Reading a recent issue of Sail magazine I was admiring the look of the new Rustler 36 and, thinking to myself, what a nice cruising boat it would be. Well, right up till the point that I saw it was around $450K for a "sailaway" version.

Which is not to say that the Rustler is not a very, very nice boat but an over half-million dollar, old-school design boat by the time you get it off the dock for something that performs like and will take you to the same places as an old CAL 36 (or insert your favorite older classic plastic 36 here) you could buy for less than $15K.

Throw in a smart $10K bespoke refit and anchor it next to the Rustler 36 and 99% of folks who dinghy by wouldnt be able to tell the difference between the two...

Maybe its just me but I just cant see any way that extra $425K spent would make my life any better.

Just saying.

Listening to a hurdy-gurdy man...

So it goes...

Read More..

Builders to do list

Order Star 45 construction drawing from AMYA store

Buy or borrow books on boat building. Join the Star45 discussion forum.

Decide on type of planking and wood to be used to build the model.

Set aside a work space for building.

Review the bill of materials need to build the model and buy the materials.

Order deck and mast fittings.

Order mast (if you are buying the mast) and order sails (or sail material).

Choose the radio system, buy a sail control unit, Order keel bulb.

While the hull is under construction build:

Keel fin and ballast bulb

Rudder assembly

Make or assemble spars ( mast and booms)

Build cradel to hold boat under construction and when finished.

Test Radio System and sail control unit

After hull is planked:

Install keel trunk or provisions for mounting keel.

Install radio and sail control unit, Then remove while construction continues.

Contstruct deck and hatches

Install/mount deck fittings

Test access to radio and sail control inside the hull.

Provide a exit guide for radio antenna so it can be attached to mast or stays.

Install power switch for turning off batteries

Test mount keel

Paint hull, rudder and keel

Assemble hull, rudder and keel

Set up mast and boom.

Install radio controls.

Check running rigging.

Attach Sails

dry sail model

--

Sail
Display
Storage

Read More..

How do you determine the number and dimensions of staves in a Birds Mouth Mast or Spar

Birdsmouth is the word in the shop, lately. We have several orders for birdsmouth masts and spars that are in progress. I have been working hard at nailing down the process to be able to make them efficiently and to a very high standard and feel very excited about how it is all going. The Landing School of Boatbuilding has asked me to to give a talk/demo on making things birdsmouth style, so Ive been pressed to improve our webpage on birdsmouth spars as well. On the page is my procedure for determining the number and dimensions of staves in a birdsmouth spar. Gaeten Jette, a featured contributer to Duckworks magazine on the topic of Birds Mouth Spars, generously helped me customize the online calculator for my use and students use. I hope you find it helpful, too.

We make two styles of Birdsmouth spar, using symmetrical staves (most common) and asymmetrical staves, which when done correctly will yield a perfect octagon and a spar that is slightly stronger and quicker to make. I decided to apply this type to making an ultralight kayak paddle shaft.



I am pleased with the results. The biggest hold up was fitting the plugs in the scoops that will take a ply-composite or a carbon fiber blade, which is already something we produce for our wood/composite, high performance oars.

With that part of the process ironed out it really is just a matter of setting up the operation to produce these paddles after some testing. This one will go to some paddler friends who will take the design on the seas and really test it out. Hopefully, sometime this summer the results will come in and production will begin. Ill leave you with the best part of making new things: breaking them with a hammer. We test most spars this way to make sure that things break the "right" way. That is, in a proper glued structure, the wood should always break before the glue joint does, otherwise there is a problem. Happily, all our spars have been breaking the "right way" in the shop so we know they wont break out on the water.

Read More..

Guide to Get Homemade jon boat plans do it yourself

Topic Homemade jon boat plans do it yourself currently i stumbled upon this Homemade jon boat plans do it yourself Search results for Homemade jon boat plans do it yourself it is not easy to obtain this information Before going further I found the following information was related to Homemade jon boat plans do it yourself here is the content one photo Homemade jon boat plans do it yourself

Read More..