Small Reach Regatta Day 2 in Drake Rowboat

I was a little nervous beginning day 2 on a long reach with a potentially gusty offshore breeze that would carry the fleet 8+ miles to the lunch stop. The cracked mast step was only glued back together last night. Would it hold? This was going to be the same tack that I was on when it snapped. I didnt want to ruin this sail!

While the rowboa

ts and sailboats waited for the whole fleet to be launched and hoist sail for the departure, I

lounged on the floorboards enjoying an egg sandwich made by the caterer who cooks for the event. The food is great and the camaraderie while dining is something I enjoy every year. I saved my sandwich for this moment, laying back on the thwarts in the morning sun watching all the sails around me skitter about waiting for the moment when the lead chase boat would say "every body is in, lets go!".

The sail was east to Flanders Bay where we were to lunch at a bar connecting Ash and Sheldrake Islands (family islands that I arranged for us to have as a lunch spot). The fleet sailed on port

tack on a beam reach for all 8 miles to the stop. It was a hoot to say the least. Drake was right up with all the Caledonia Yawls and other larger sail craft. People were quite surprised to see this long, skinny rowboat pass them or hold position next to boats with much larger sail areas. And to my delight the mast step held.

But this morning was proving something that I try to espouse whenever possible: a rowboat with at least some keel to it can sail downwind quite

fast, but not up wind. And you dont need to ruin

the lines of the boat for rowing and you do not need to add the complexity and drag that a centerboard or daggerboard introduces. Lee boards are simply not necessary for off the wind sailing. Drake has enough stability and keel to even sail without any slippage on a bean reach, and this was a revelation this morning on Frenchman Bay.

The lunch was quick as the tide was eating up the bar -- we arrived a little too late. But the scene was quite spectacular with MDI and Tunk mountain and islands all around. I was the first boat to the bar and the 50 or 60 boats sailing into the bar was just a blast to watch.

The return trip was a 8-mile row to windward, through Sorrento Harbor right by Hancock Point and dir

ectly to Lamoine State Park. Drake showed her stuff by being able to row a steady 4+ knots back to the start line and beat most of the sailboats that had to tack many times to get home. This is what she was designed to do: sail smartly off the wind and row efficiently upwind. If this were a real RAID I would have no doubt t

hat we could be very competitive and with a larger boat for two rowers, probably win. But I enjoy the autonomy, privacy, and relaxation that rowing and sailing alone can bring.

Read More..

Caravelle A 14 1 2 foot rowing skiff after the Echo Bay Dory Skiff

 

Well, Spring is springing here on the Maine Coast so it is time to start unveiling some new designs at Clint Chase Boatbuilder. The pictures are of a scale model of a new skiff design by Eric Risch. We have been collaborating for years on the Echo Bay Dory Skiff and when a couple on Marthas Vineyard said, "We want a bigger version of the Echo Bay", I went to Eric and said, "We have a project!". This is the result of a redrawing of his old design, Caravelle. The result will be a stable but slippery rowing skiff with a transom that well clears the water, an immersed stem to prevent slapping/pounding in harbor chop, and space for two to row with their dog. Moreover, shell weight 90 pounds and be easily cartopped with a custom canvas cartopping cover. We plan to start construction on two skiffs May 1 and launch after July 4th.



More to come about Caravelle and the Echo Bay DOry Skiff Kit packages.

Read More..

Thinking About Phil Bolgers MICRO Part 2

A little while ago I wrote a preamble in response to a request from Dennis Marshall for comments about Phil Bolgers wonderful Micro design - see http://rosslillistonewoodenboat.blogspot.com/2011/05/thinking-about-phil-bolgers-micro.html

Dennis request went as follows: -
Dear Ross,
I hate to commandeer your blog with all my questions and comments. I do enjoy it immensely. I was wondering if you would be so kind as to comment on Bolgers Micro at some future date. I would be very interested in hearing about your experiences with her and your assessment of her abilities. That was the first boat plan I ever bought. And ten years later, she still intrigues me.

My feeling is that Micro was designed while Phil Bolger was at his peak. Some of my very favourite Phil Bolger designs (but not all) come from that period, and include Black Skimmer, Micro, Long Micro, Martha Jane, Sparkler, Scooner (a.k.a Light Schooner), Otter II, Manatee, Surf, Folding Schooner, Harbinger, Dovekie, Defender, Light Dory Type V, Light Dory Type VI, Victoria, Thomaston Galley, Fieldmouse, Lynx, Monhegan, Yarrow, Nahant, Hope, June Bug, Burgundy, Pico, Apogee and Birdwatcher - the list goes on and on, and I really dont know where to draw my personal line. Suffice to say that of all the designers Im aware off, Phil Bolger has had the greatest influence on my thinking.

You may think it is a case of hero-worship, but I dont believe that is the case. It is just that Phil had such an open mind from a technical point-of-view that I am constantly discovering more thought gems. It is noteable that he said on a number of occasions that Ray Hunt was the designer who had the most influence on his own thinking, and that it was because of Ray Hunts open mind....

To Micro... well, where do I start? From the bow, I guess.

??



Integral boarding ladder which makes the boat go faster!

??
• The first thing you notice is that Micro has a transom (or flat) bow with a couple of prominant holes. I believe that the reason for this is that Phil was attempting to match up the curve of the topside panels (in plan view) with the curve of the bottom panel (in profile view). If the bow was drawn out long enough to come to a point, the side panels would have been longer than two butted plywood sheets, and the heel of the stem would have been way up in the air adding weight and windage, but without any hydrodynamic improvement. So, he just cut the bow off at the length of two plywood sheets. The boat is faster and better handling as a result. Being a sharpie, she sails on her chine and doesnt need a sharp bow. The resulting flat bow transom has been turned into a superb boarding ladder - that is what the holes are for - and where do you push-off when leaving a ramp or a semi-submerged trailer? From the bow, of course! How many people have you seen struggling to get onto a boat through the pulpit? With Micro, it is simple, elegant, and (usually) graceful.??
??
• The self-draining, open bow well. This compartment is a superb amenity, and can be seen on many Phil Bolger sharpie designs. When standing in the well, one is well supported at hip height, so that working on the mast, halyards, or ground tackle is made into a two-handed affair - no need for the "one hand for the boat, and one hand for youself" routine



Well supported in the self-draining forward compartment

• The Cat-Yawl rig allows the masts to be positioned at either end of the boat, meaning that the entire length of the boat is free for accomodations. A minor drawback is that the weight of the main mast is in the eyes of the boat, and therefore drugs her in a chop. But Micro quite full in the forward sections, and can stand the weight. I make my masts hollow, so weight is reduced. The mast step and partner arrangement is simple, reliable, and allows for easy stepping and lowering of the mast - all without the weight and complication of a tabernacle.



Micros simple, rugged, and easy-to-use mast stepping arrangement

• The cabin and cockpit are overlapped. The lower legs of a person on one of the bunks in the cabin are under the butt of a person sitting in the forward part of the cockpit. Therefore, crew-weight is concentrated in the middle of the boat, while still having a combined length of cockpit and cabin which is shorter than the sum of the two. Think about how quarter berths work, but the Micro solution to accomodation problems is even more elegant.
• Micros cockpit doesnt have a conventional foot-well. The cockpit is in fact a deck on which one sits, with a hatch in the middle through which you can hang your legs if weather permits. The hatch is on the centreline, so that even if she is on her beams end, the capsised water-line is below the hatch opening. The hatch also gives access to the enormous cargo hold below the aft end of the cockpit. If there were a foot-well, this superb hold would not be possible. The hold can also be accessed from within the cabin.
• Right aft, there is another open, self-draining well into which the mizzen mast, outboard mount, outboard fuel tanks, ground tackle etc all fit. In the event of the cockpit flat being pooped, all of the green water can instantly run into the aft well, and the majority will pour out of the large outboard opening in the transom in an instant. The remainder will flow out of the drain holes and the opening around the rudder post.



Drain holes visible just aft of the tie-down strap, and around the rudder post

• The rudder is mounted on the aft end of the keel, and because the rudder post runs up into the self-draining stern well, there is no need to worry about sealing where the rudder post goes through the hull - ever!

Convenient motor mounting which also acts as a super-fast way of ridding the cockpit of water

• The keel structure is hollow other than for the middle section in which the 412lb lead ballast casting is located. The remaining hollow sections are free-flooding to make use of the neutral buoyancy of the water filling, and to obviate the problems of swelling and contraction of large timber deadwood components. In addition, solid timber deadwood sections tend to float (which the water filling doesnt) resulting in a reduction in stability when heeled. So Micros water and lead-filled keel is cheaper, easier to make, lighter, and provides more stability.

Just visible near the bow is one of the vent holes in the keel structure. The solid lead casting runs from approximately the first trailer roller to the third trailer roller.

• There is a vent in the forward bulkhead, another one in the aft bulkhead, and a clever arrangement for venting under the companionway hatch. All of these are arranged to allow air in and out while keeping water outside the hull - even when partially capsised. Even with the boat totally closed up, she is well ventilated.

There are many, many other subtle details in the design of Micro, but Ive written too much for one sitting. A careful study of hundreds of Phil Bolger designs will reveal many similar examples of the designers genius. The great pity is that so many people see the simplicity of his more notorious designs without understanding the genius which produced them. As a result, the majority of the amateur-built PCB boats we see have been altered to a greater or lesser degree - usually without the builder or owner being aware of the design elements being violated along the way. What happens is that the crudities remain, but the genius is lost forever....

Read More..

A Season in Mexico Part 2 Marinas

The Honcho took berths in ten Marinas in Mexico and found them comparable to American marinas in many ways. Each of those marinas is listed below, along with a summary of our experiences there.

Cruiseport (Ensenada)  http://ects.enseit.com/ecpvmarina/
Located just past the Naval Base in the port of Ensenada. The entrance channel is well marked and easy to navigate.This is a modern marina with good facilities and excellent staff. Cruiseport Marina is the ideal place to officially check into Mexico. They will assist you with all the necessary paperwork and drive you to the Port Captains office at no charge. If youre not fluent in Spanish, Jonathan will translate and assist you with all the necessary forms and documents. There are many marine stores, restaurants and tiendas within walking distance, but youll want a cab to get to the local Costco or Walmart. I think this is the best marina in Ensenada because of its central location and low cost. One downside is that there is no fuel dock there, but Jonathan offered to drive me and four jerry jugs to a gas station downtown that sells diesel at no charge. Very friendly and helpful.

Marina Cabo San Lucas (Cabo San Lucas)  http://www.igy-cabosanlucas.com/
This is a very well equipped marina in the heart of the tourist area in Cabo. It is expensive (we paid $125 USD/night in November, 2010 but I think they have lowered their prices somewhat recently). The staff was friendly and the marina offers clean showers and laundry facilities and even a small swimming pool for guests. The central location was nice because nearly everything is within walking distance, but there are at least a dozen nightclubs within shouting distance, so we were serenaded every night until around 0400 by a dozen bands. The music and high prices drove us out of Cabo after only two nights.

Puerto Los Cabos (San Jose del Cabo)  http://www.puertoloscabos.com/about_the_marina.php
This is a new marina and is part of the Puerto Los Cabos Resort. As of June, 2011 the slips were completed but not all had electrical outlets. Prices were much better than at Cabo. We got a slip for $40 USD/night in a slip without electricity, which was fine with us. The same size slip with electricity was quoted to us at $80/night. Restrooms and showers were in trailers but there are plans for more permanent facilities. The harbor at San Jose del Cabo did not show on our Maxsea electronic charts nor on our GPS, but the Navionics app on our I-Pad showed it. Its a moderately long walk to downtown San Jose so youll want a taxi to get to the local (new) Walmart. There is a restaurant and gift shop at the marina. Prices are high, but the burgers were good. This marina is about 16 miles from Cabo San Lucas and is, in my opinion, a better place than Cabo to stay while waiting for a weather window for boats that are headed north along the Pacific coast of Baja.

Marina Palmira (La Paz)  http://www.marinapalmira.com/
Located just outside of downtown La Paz, Marina Palmira is our favorite place to stay in La Paz. While not a new marina, it is well maintained, with electronic gate locks on the gangways and plenty of security. It is affiliated with the Hotel Marina so we had free access to the large hotel pool, a necessity from May through October. There are a couple of good restaurants at the marina, and its a pleasant 3 mile walk to downtown La Paz from there along the beautiful malecon. We provisioned twice in La Paz, visiting the Soriano and Walmart. They are both too far to walk, but taxis are inexpensive in La Paz. Like most of the other marinas we visited, Marina Palmira offers free wifi, and like the others, it was spotty  at best. We always relied on our Telcel 3G cards in Mexico and were seldom disappointed by them.

Marina de La Paz (La Paz)  http://www.marinadelapaz.com/
This is the main marina in downtown La Paz. Older that the others, it has a character of its own that makes it hospitable to many long-time live-aboards. For us, the key attraction of this marina is its location in the heart of downtown La Paz. There are several marine stores as well as hardware stores, shopping mall, immigration office, restaurants and other services all within walking distance of this marina. Being downtown, its noisier and more crowded than Marina Palmira. This marina is also home to Club Cruceros de La Paz. This organization offers all sorts of services and information for cruisers in the Sea of Cortez http://www.clubcruceros.org/. We stayed in this marina in the month of May, and it was quite hot, with little wind during the day and the surrounding buildings and geography blocking much of the cooling Coromuel winds at night. The local year-round liveaboards assured me that you get used to the heat. Im not sure I want to do that myself, but its clear that many American and Canadian expats have found a home here.

Marina Mazatlan (Mazatlan)  http://www.marina-mazatlan.com/
Located about 10 miles north of downtown Mazatlan, most charts dont show this marina very well so I recommend using the Pacific Mexico Cruising Guide by Shawn Breeding and Heather Bansmer for accurate navigational information. The channel entrance is narrow and sea conditions can sometimes make entering or leaving tricky. The channel entrance requires constant dredging to keep it navigable and it is occasionally closed due to ongoing dredging operations. If in doubt, hail the marina on the VHF to check on conditions.
 Mazatlan is an important commercial port and you can find almost anything you need here. There are good restaurants, a shipyard and other conveniences within walking distance of the marina, but its too far to walk downtown, which is where you need to go for provisions. You can take a bus, taxi or pulmonia for a few pesos. The pulmonia is unique to Mazatlan.  It is a small open vehicle with a canvas top. Its cheaper than a regular taxi and in Maazatlans warm climate you dont need doors and windows, so whenever possible we took a pulmonia, which was more fun than a bus or taxi.

There has been some drug related violence in Mazatlan and at the time we were there cruise ships were not calling at the port of Mazatlan, so the town was a bit quieter than normal. We enjoyed the beautiful old city of Mazatlan and could have stayed there longer if wed had time.

Marina Riviera Nayarit (La Cruz de Huanacaxtle)  http://www.marinarivieranayarit.com/
This was our favorite marina in Mexico. Nearly new and very well maintained, Marina Riviera is probably as good as it gets. It is located in La Cruz de Huanacaxtle, on the north shore of Banderas Bay. La Cruz is a picturesque town with just the right combination of old Mexico charm, yatistas and an interesting mix of expats from around the world. The marina sports a yacht club with an excellent restaurant and bar, fuel dock, shipyard with 150 ton travelift, convenience store and laundry. There are plenty of good restaurants within walking distance, ranging from high end Italian to funky outdoor places with live music. We especially enjoyed Philos, Ana Bananas and Frascati. If I could visit only one marina in Mexico this would be it.

Paradise Village Marina (Nuevo Vallarta)  http://www.paradisevillagemarina.com/
Located in Nuevo Vallarta, about 10 miles from downtown Puerto Vallarta, Paradise Village marina is built on an estuary, so bring your bug screens. This marina is a bit older than the one in La Cruz, but it is well maintained, with good facilities and friendly help. It is part of the Paradise Village resort, so visitors have access to the hotel pool and beach. This place reminded me of Marina Del Rey in California. So if you like Del Rey, youll like Paradise Village Marina.

Marina Vallarta (Puerto Vallarta)  marvta@prodigy.net.mx
Located in the port of Puerto Vallarta, this marina was once a fine place to stay while you visited the city of PV, but when we visited, it was fairly rundown. Security was so-so, and the noise level was only a few decibels this side of Cabo San Lucas. It does have the benefit of close proximity to downtown PV, which is a wonderful city.

Marina Ixtapa Nautica (Ixtapa)  www.marinaixtapa.com
Like Paridise Village Marina, Marina Ixtapa Nautica is also part of a larger resort. As such it offers good facilities, access to fine restaurants and shops, and a nice beach.  It is located a short bus or taxi ride from the beautiful city of Zihuatanejo, where there an excellent anchorage for when you tire of marina life. Isla Ixtapa is less than five miles away by boat and is a perfect place to anchor for the day and snorkel or lounge on the beach. While anchored there I cleaned the bottom of our boat, which is prohibited in the marina due to the large crocodiles that occasionally swim through.

Read More..

Looking for Free 2 sheet plywood boat plans

For you Free 2 sheet plywood boat plans today i found the Free 2 sheet plywood boat plans Find here about Free 2 sheet plywood boat plans very easy job for you Before going further I found the following information was related to Free 2 sheet plywood boat plans check this article Sample images Free 2 sheet plywood boat plans Boat Building Plans

Read More..

2 sheet plywood boat plans

2 sheet plywood boat plans one photo 2 sheet plywood boat plans Small Plywood Boat Plans Free Free Plywood Boat Plans Thread: Suggestion for a DIFFERENT Christmas present Free Pirogue Boat Plans Plywood Boat Plans

Read More..